UNI-T UT71A Operating Manual page 19

Model UT71A/B: OPERATING MANUAL
Button
Peak HOLD l
In Setup, each press to select the digit you want to edit.
HOLD
l
In Recall, press to enable SEND feature (UT71B only)
l
In Store, press to toggle between clearing all the stored
reading or start storing reading from the current index
number. (UT71B only)
Press to exit certain button functions and the Meter will return
LIGHT
EXIT
to the factory default setting.
Press to turn the backlight on. It is possible to toggle between
1 st and the 2 nd backlight level and Exit the feature by pressing
this button. After exiting the light feature, it is necessary to
press and hold the button for over 1 second to turn the
backlight on again.
Table 2-2. Functional Buttons
Description Access Method
Press the button once after entering
Setup or Recall or Store mode.
Press the button once.
Press and hold the button for over 1
second.
17