UNI-T UT71A Operating Manual page 18

Button
Setup feature:
SEND
In Setup, press to select OFF at the selection of HIGH and LOW
(UT71A only)
Store feature:
RECALL
STORE
Store the current measurement value. Press EXIT to exit
(UT71B only)
the Store feature.
Recall feature:
Recall the stored value. Press EXIT to exit the Recall feature.
Setup feature:
In Setup, press to select OFF at the selection of HIGH and LOW
Hold feature:
Peak HOLD
HOLD
Press HOLD to freeze the displayed value. Press EXIT to
release the display.
Peak Hold feature:
Press to access Peak Hold feature, the primary display
shows PEAK HOLD. Press EXIT to exit.
16
Table 2-2. Functional Buttons
Description
Model UT71A/B: OPERATING MANUAL
Access Method
Press the button
once after entering Setup mode.
Press the button
once.
Press and hold the button for over 1
second
Press the button
once after entering Setup mode.
Press the button once.
Press and hold the button for over 1
second.