I Wake-On-Lan Connector; J Soft Power Connector - TYAN Tiger MP S2460 User Manual

2.6-I. Wake-on-LAN* (WOL)
This header supports the optional Wake-on-LAN feature.
2.6-J. Soft Power Connector
The soft power connector is part of jumper block J12 (pins 13 and 15). This board uses the chipset for
power management, including turning on and off the system. If the power button function option in the
BIOS Power Management menu is set to "On/Off" (which is the default), pressing the power button once
after the BIOS has booted up will turn the system on and off. If the power button function is set to Sus-
pend, pressing the power button once will wake up the system or send it to Suspend mode. In this case,
you cannot turn the system off unless you shut down through the Windows operating system or you hold
the power button down for four seconds (BIOS-dependent feature).
16
WOL
3 4
5 6
7 8
9 10
11 12
ground 13 14
switch 15 16
17 18
ground 19 20 no connect
switch 21 22 ground
23 24
25 26
Abbreviations
Pwr Power
Slp Sleep
http://www.tyan.com
VCC