4.3.6.3. 802.1x PerPort Configuration
In this page, set the authorization status to activate 802.1x function by port
1. Select <Edit>.
2. Status: Press <Space> key to choose Fu / Fa / Au / No authorization status.
3. Press Ctrl+A go back action menu line.
4. Select <Save> to save all configure value.
Note:
Fu Force the specific port to be unauthorized.
Fa Force the specific port to be authorized.
Au The state of the specific port was determined by the outcome of the authentication.
No The specific port didn't support 802.1x function.
- 111 -