State Activity - TRENDnet TEG-S2400i User Manual

Actions->
1. Select <Edit>.
2. Group: Display the trunk group ID.
3. LACP: Display the trunk group's LACP status.
4. LACP Work Port Num: The max number of ports can be aggregated at the same time. If LACP
static trunk group, the exceed ports is standby and able to aggregate if work ports fail. If local
static trunk group, the number must be the same as group ports.
NOTE: Before set this page, you have to set trunk group on the page of Trunk Configuration first.

4.3.5.2. State Activity

Actions->
1. Select <Edit>.
2. Press Space key to choose the item.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and responds only if it
receives LACP protocol packets from the opposite device.
3. Press Ctrl+A go back action menu line.
4. Select <Save> to save configure value.
NOTE: If user set LACP mode in the trunk group, all of the member ports of this trunk group will set
"Active" automatic.
- 105 -