Input characters
ex. Print the following label tape.
Label tape being used: 9mm label tape
Two-line printing is not performed properly when using label tape that is 6mm wide, heat shrink tube, or 4mm
I.D. strip.
1
Input "10W" .
If you accidentally input an incorrect character, press [Back Space] to delete the character
and then input the correct one.
2
Press [Enter].
•
A new page appears, and the system waits for input of more
character data.
3
Press [Style].
•
Since the middle label has two lines press [Style] to change the
Line setting.
4
Press [ ◄ ] or [ ► ] to select "2:Line" , and press [Enter].
•
The Line setting display appears.
5
Press [ ◄ ] or [ ► ] to select "2:2 lines" and then press [Enter].
6
Input "+12V" .
38
Indicates that another page precedes the
currently displayed page.
The input display now has two lines.