Replacing a tube or the label tape cassette
Remove the tube or label tape cassette as follows, and install a new one.
Contact your dealer if you need to purchase tube or label tape cassettes.
The procedure for replacing a tube or a label tape cassette also applies when replacing heat shrink tube, wrap around tape or 4mm I.D. strip.
Clear tube is handled in the same way as regular tube.
1
Press [Remove] and then [Enter].
•
Media is ejected in the opposite direction.
After pressing [Enter], use the feed function if the tube or label is not released from the
transport roller (unable to remove) even after the printer has stopped. ("When a Tube or
Label Tape is Not Ejected/Fed" (
2
Open the cover.
3
Remove the tube attachment or label cassette from the
machine.
•
While pulling the lever to the right, lift and detach the label tape
cassette.
Dispose the used tubes and label cassettes according to local government regulation.
4
Install the new tube or label tape cassette.
•
See "Part 2 Basic Operation" for detail.
page 94))
Part 5
Maintenance
101