Blaupunkt Woodstock DAB54 Operating Instructions Manual page 76

MAIN SCREEN
To exit this screen, tap on OK in the top
right corner.
6.5.2.2 Options Screen
Picture 10 PocketDAB options screen
In the Options screen, you can change
the behaviour of the PocketDAB appli-
cation.
Using the "General / COM Port" drop-
down list, you can select the serial port
for communication between the PDA
and the Woodstock. The setting will be
applied after a restart of PocketDAB. By
default, "Serial" (COM1) is selected for
communication with a serial cable.
For BT you have to select one of the
listed COM ports. Most of the time this
will be "BT COM8" (COM8) or "BT
COM5" (COM5). The other listed COM
28
ports are only for special cases. To iden-
tify the correct BT COM port for your
PDA you have to open the "Bluetooth
Settings / Serial Port" menu of your
PDA. You have to select the outbound
COM port. For the HP H2210 this is
COM8.
Using the "Mot / BWS Profile" dropdown
list, you can select the profile for the
BWS decoding. Two profiles are sup-
ported - the "PC" and the "Basic". By
default, "PC" is selected. The setting will
be applied after a restart of Pocket-
DAB.
Using the "Cache / Cache Path/
Browse" button, the storage path for the
decoded BWS objects can be select-
ed. The setting will be applied after a
restart of PocketDAB and your old
cache will automatically deleted.
Using the "Cache / Max Cache Period"
drop down list, you can select the max-
imum cache retention period after that
objects are deleted. On start-up the
application will prompt you to confirm
the cache deletion if this period is over.
By default, the cache retention period
is set to "Unlimited".
Using the "Cache / Clear Cache" but-
ton, you can delete the entire cache
immediately.
To exit this screen tap on OK in the top
right corner.