Blaupunkt Woodstock DAB54 Operating Instructions Manual page 57

Selecting vehicle presets
You can select optimised equalizer set-
tings for the following vehicle types.
COMPACT
4DOOR
CONVERT
VAN
ROADSTER
MINI
TRUCK
The settings for these vehicle types
have already been programmed.
Press and hold down the
AUD•DEQ button @ for longer
than two seconds.
Press the or
edly until "CAR PRESETS" ap-
pears in the display.
Press the OK button :.
Press the or
edly until the vehicle type that you
want is displayed.
Press the AUD•DEQ @ button.
The settings are saved.
Automatically calibrating the
equalizer
You can electronically calibrate and
store values for one of the three equal-
izers ("EQ1", "EQ2" or "EQ3"), e.g. for
one of the following situations:
For the driver alone
For the driver and front passenger
For the front and rear occupants
button 7 repeat-
button 7 repeat-
Hold the calibration microphone in the
appropriate position whilst calibration is
taking place.
The position of the microphone for Sit-
uation 1 (e.g. for the driver alone) is at
the height of the driver's head, approx.
10 centimetres next to the right ear.
For Situation 2, the microphone should
be positioned at head height between
the driver and the front passenger.
For Situation 3, you should position the
microphone at head height in the cen-
tre of the vehicle interior (left/right, front/
rear).
Really quiet surroundings are required
for the calibration. Any extraneous noise
will distort the measured values. The
windows, doors and sunroof must re-
main closed during the calibration proc-
ess, and you should be seated in the
driver's seat.
Note:
You can obtain the calibration micro-
phone necessary for this from acces-
sory retailers.
During calibration, the temperature in-
side the vehicle must not exceed 55 °C
since this could lead to falsified meas-
urements.
The sound radiating from the loud-
speakers must not be obstructed by any
objects. All the loudspeakers must be
connected. The microphone must be
connected to the device.
To calibrate the equalizer electronically,
Press and hold down the
AUD•DEQ button @ for longer
than two seconds.
EQUALIZER
121