Radio Mode; Switching To Radio Mode; Convenient Rds Functions (Af, Reg); Selecting The Waveband / Memory Bank - Blaupunkt Woodstock DAB54 Operating Instructions Manual

RADIO MODE

Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.

Switching to radio mode

If you are in CD/MP3, MMC, DAB, CD-
changer or AUX mode,
press the BND•TS button 3.
or
press the SRC button A repeated-
ly until "TUNER" appears in the dis-
play.
Convenient RDS functions (AF,
REG)
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio's range of functions.
AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
transmitting different programme
content.
88
Note:
REGIONAL must be activated/de-
activated separately in the menu.
Switching REGIONAL on/off
Press the MENU button 9.
"TUNER MENU" appears in the display.
Press the OK button : to display
the tuner menu.
Press the or
edly until "REG" appears in the dis-
play. "OFF" or "ON" is displayed
alongside "REG".
To switch REGIONAL on/off, press
button 7.
the or
Press the MENU button 9.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
press the RDS•SF button >.
The RDS functions are active when
RDS lights up in the display.
Selecting the waveband /
memory bank
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Five stations can be stored in each
memory bank.
button 7 repeat-