Blaupunkt Woodstock DAB54 Operating Instructions Manual page 46

MMC/SD MODE
please read the "DAB mode" chap-
ter.
Press the REC•DEL button ?
when you want to start recording.
Notes:
You cannot start recording during
the first 15 seconds after switching
to DAB mode or after switching on
the radio with DAB mode activated.
This also applies even if you
pressed the REC•DEL button ?
and "RECORDING" appears in the
display.
To avoid damaging the MMC/SD,
you should never start the engine
whilst recording. Starting the en-
gine might cause the voltage of the
vehicle's electrical system to drop,
which could permanently damage
the MMC/SD.
The automatic DAB-FM switching
feature is deactivated whilst record-
ing is taking place. The DAB pro-
gramme remains tuned during re-
cording, even if the reception quali-
ty deteriorates.
Recording starts and "RECORDING"
appears in the display for 2 seconds.
If there is insufficient space available on
the card, "CARD FULL" appears in the
display for 2 seconds. In this case, de-
lete some tracks from the MMC/SD (see
"Deleting recordings" below) or insert
another MMC/SD.
The file created during recording is giv-
en a name as follows:
ddhhmmss.mp3. "dd" stands for the
day the recording was made, "hh"
110
stands for the hour recording was start-
ed, "mm" stands for minutes and "ss"
for seconds.
The device creates the "DAB_DIR" di-
rectory on the MMC/SD to store the re-
corded files.
Telephone/navigation during
recording
Telephone calls or voice output from a
navigation system do not affect record-
ing. The DAB programme continues to
be recorded in the background during
a telephone call or voice output.
Stopping recording
If you want to stop recording,
briefly press the REC•DEL button
?.
"RECORDING STOPPED" appears in
the display for two seconds.
Recording is stopped automatically in
the following cases:
If the storage space on the MMC/
SD fills completely during record-
ing. In this case, "CARD FULL" ap-
pears in the display.
If you switch programmes during
the recording.
If a problem arises with communi-
cations between the MMC/SD and
the device, you will see "MMC ER-
ROR" appear in the display and re-
cording is then stopped.
If you deactivate DAB mode whilst
recording, e.g. by switching to CD
mode or radio mode.