Adjusting Seek Tuning Sensitivity; Storing Radio Stations; Storing Radio Stations Automatically (Travelstore); Recalling Stored Radio Stations - Blaupunkt Honolulu CD50 Operating Instructions Manual

Adjusting seek tuning sensitivity

It is also possible to adjust the sensitiv-
ity of the seek tuning function to tune
the radio into stations with strong recep-
tion signals only, or to those with weak-
er reception signals as well.
Press MENU 8.
: repeatedly until
Press
"SENS" appears in the display.
:.
Press
The currently selected setting will ap-
pear in the display. "SENS HI" indicates
the highest level of sensitivity, "SENS
LO" the lowest. If you select "SENS LO",
"lo" will light up in the display.
: to adjust the desired
Press
sensitivity.
Once you have made your selec-
tion, press MENU 8 or OK ;.

Storing radio stations

Storing radio stations manually
Select the desired memory bank
FM1, FM2 or FMT or the wave-
band AM.
Tune the radio into the desired sta-
tion.
Press and hold down one of the
station preset buttons 1 to 6 > on
which you want to store the radio
station for longer than two sec-
onds.
RADIO OPERATION
Storing radio stations
automatically (Travelstore)
You can automatically store the six ra-
dio stations with the strongest reception
in your current reception area. These
stations will be stored in the FMT or AM
memory bank depending on the select-
ed waveband.
Note:
Any stations stored previously in the
memory bank will be deleted.
Press TS ? briefly.
The storing process will begin. "TRAV-
EL-STORE" will appear in the display.
After the stations have been stored, the
radio will automatically begin to play the
station stored on preset button 1 of the
respective memory bank.

Recalling stored radio stations

Select the desired station memory
bank.
Press the station button 1 to 6 >
on which you have stored the de-
sired radio station.
Scanning the radio stations
within reception range (SCAN)
You can scan all of the radio stations
currently within your reception range.
The scan time can be set in the menu
to play from five to 30 seconds.
Starting SCAN
Press and hold down OK ; for
longer than two seconds.
11