FOLSOM PresentationPRO PS-2001 Installation And Operator's Manual page 47

Description: Selects the video input source and switches to this input using the currently selected transition
type. An input source selection of 8 will display the Logo if one is stored in non-volatile memory, or
black if no logo has been stored.
Parameters: n -
Query:
RTE?
Returns the Video Input Source in the format:
=n
Example: RTE 5
RTE?
Command:
STAT?
Description: Print System Status value
Parameters: None
Example: STAT?
Command:
SYSAVE
Description: Saves the system parameters to non-volatile RAM. The system parameters
stored are the output format, sync, and frame rate, the audio parameters, the effects
parameters, serial port configuration parameters and the front panel lock out mode. Upon
power up, the system parameters stored in non-volatile RAM are used for system
configuration.
Parameters: None
Example: SYSAVE
Command:
TRM n
Description: Transition freeze mode
Parameters: n - type [I|B|?]
Query:
TRM ?
Returns the current transition freeze mode:
= n
Example: TRM I
TRM B (Set the transition mode to display a black screen at the start of a transition.)
Command:
TRNE n
Description: Transition Edge Width for wipe-type transitions.
Parameters: n -
Query:
TRNE?
Returns the Transition Edge Width in the format:
=n
Example: TRNE 4 (Set for wipes using edge adjust width of 4.)
TRNE? (Returns the transition edge width.)
Command:
TRNM n
Description: Selects the transition type to be used when changing input sources.
Parameters: n -
Manual # 26-0006901-00 / Revision E
Input Source; [1-8]
(Select input source 5.)
(Returns the input source.)
(Returns a system status value for factory use.)
(System parameters are saved to non-volatile RAM.)
(Set the transition mode to freeze the currently displayed image.)
pixel width, [2 – 32]
Transition Type:
0 = Cut
1 = Dissolve
2 = Wipe Right
3 = Wipe Left
4 = Wipe Up
5 = Wipe Down
6 = Curtain Open
7 = Curtain Close
PresentationPRO – A/V Seamless Switcher 38