Table of Contents
Advertisement
(1365x768) and (1365x1024). Press SEL to accept the newly entered settings or ESC key to exit without accepting
the changes that have been entered. Please note that selections for this menu item do not become active until the
SEL key is depressed.
Frame Rate
The Frame Rate menu item allows the user to select the desired output frame rate. To perform adjustments, scroll to
the Frame Rate menu line, select the menu item with the SEL Key, and then turn the adjustment knob to select the
desired output frame rate (50Hz, 59.94 Hz or 75 Hz). Press SEL to accept the newly entered settings or ESC key to
exit without accepting the changes that have been entered. Please note that selections for this menu item do not
become active until the SEL key is depressed.
Note: To eliminate the potential for frame rate artifacts it is recommended that the output frame rate be set to match
the input frame rate for video sources (59.94 Hz for NTSC, 50 Hz or 75Hz for PAL).
Sync Type
The Sync Type menu item allows the user to select the desired output sync format. To perform adjustments, scroll to
the Sync Type menu line, select the menu item with the SEL key and then turn the adjustment knob to select the
desired output sync format. The available output formats are +H+V (active high Horizontal Sync, active high Vertical
Sync), +H-V (active high Horizontal Sync, active low Vertical Sync), -H+V (active low Horizontal Sync, active high
Vertical Sync), –H-V (active low Horizontal Sync, active low Vertical Sync) –C (active low Composite Sync). Press
SEL to accept the newly entered settings or ESC key to exit without accepting the changes that have been entered.
Please note that selections for this menu item do not become active until the SEL key is depressed.
Test Pattern
The Test Pattern menu item allows the user to select a test pattern for display. To select a test pattern, scroll to the
Test Pattern menu line, select the menu item with the SEL key and then turn the adjustment knob to select the
desired test pattern. Each test pattern is displayed as the adjustment knob is turned. Press SEL to accept the newly
entered settings or ESC key to exit without accepting the changes that have been entered. The Off selection disables
the internal test pattern generator and return to live conversion mode.
Raster Box
The Raster Box menu item allows the user to overlay a border on the output image. To control the display of the
Raster Box, scroll to the Raster Box menu line, select the menu item with the SEL key and then turn the ADJUST
control to select the desired output. The Off selection is used to disable the display of the Raster Box. The raster box
can be displayed on the test patterns or over live data.
Mic and Line Setup
The MIC and LINE Setup Menu allows the user to define the MIC Gain (-43, -50, or –57db), microphone Phantom
Power mode (Off or On), and the LINE input levels (Pro or Consumer).
Manual # 26-0006901-00 / Revision E
MIC & LINE SETUP
MIC GAIN
-43DB
PHANTOM POWER
LINE TYPE
CONSUMER
ON
PresentationPRO – A/V Seamless Switcher
24
Hide quick links:
Advertisement
Table of Contents
