Sewing An Embroidering Pattern; Sewing Attractive Finishes; Using Prewound Bobbins With Standard Green Marked Bobbin Case; Using Prewound Bobbins With Alternate Bobbin Case (No Color On The Screw) - Baby Lock Ellageo PLUS BLL2 Instruction And Reference Manual

SEWING AN EMBROIDERING PATTERN

Sewing Attractive Finishes

There are many factors that go into sewing beautiful embroidery. Using the appropriate stabilizer (see page 129)
and hooping the fabric in the frame (see page 130) are two important factors mentioned earlier. Another
important point is the appropriateness of the needle and thread being used. See the explanation of threads
below.
Thread Upper thread Rayon, polyester, or cotton embroidery threads are recommended for use with this machine.
Other embroidery threads may not yield optimum results.
Use embroidery bobbin thread intended for use with this machine. When using other kinds of embroidery
Bobbin thread
bobbin thread, follow the instructions below.
■ Using Prewound Bobbins with Standard
GREEN Marked Bobbin Case
Use the standard GREEN marked bobbin case when
embroidering with the recommended bobbin thread
wound on included bobbins. When using prewound
bobbins (not included with this machine) it is
recommended to use prewound COATS "L" type or
NEBS clear plastic prewound bobbins with the
standard GREEN marked bobbin case.
■ Using Prewound Bobbins with Alternate
Bobbin Case (no color on the screw)
Use the alternate bobbin case (no color on the
screw) when a tighter bobbin tension is needed.
For replacing the bobbin case, see page 184.
Note
• The bobbin thread sensor does not work when
prewound bobbins with a center core are used.
• Due to coating on prewound bobbin thread, the
bobbin case may require cleaning occasionally
(see page 184).

SEWING AN EMBROIDERING PATTERN

■ Using Bobbin Center Pin (Spacer)

The bobbin center pin (spacer) can be used with
either the standard or alternate bobbin cases. Use
the bobbin center pin (spacer) for better thread flow,
bobbin stability and to provide the correct height for
prewound bobbins in the bobbin case.
a
Remove the bobbin cover.
b
Set the bobbin center pin.
a Bobbin center pin
c
Set the prewound bobbin in the same
direction as a regular bobbin.
d
When using a paper-sided prewound bobbin,
remove the side paper on the top side of the
prewound bobbin.
a Top paper
5
a
a
141