Side Cover - Baby Lock Cover Stitch BLCS-2 Instruction And Reference Manual

Setting Up Your Baby Lock (Cont.)

Side Cover

5. Position the telescopic thread guide.
Raise the telescopic thread guide to its high­
est position. Rotate the shaft to the left and
right until each section "clicks" into a locked
position (fig. B).
B
6. Opening Front table
To open the front table, place your thumb
against the tab, and slide the cover to the
right. A slight pull toward you will allow the
cover to swing down, providing access to
the chain looper.
(fig. C).
C
Open side door on the left for easy access to
the chain looper thread tray.
Close door before sewing.
O
V
E
R
V
I
E
W
9