Axminster SIEG C4 User Manual page 24

Fig C
Angle support casting
Fig D
Mill assembly
Step 4
Tip the lathe forward and have your assistant thread
the support leg up into the angle support casting.
(See figs C & F ) Adjust the the support leg until it
makes contact with the
surface of your bench or
stand, tighten the lock
nut to lock the leg in
position.
Step 2
Offer up and secure the angle support
casting to the side of the lathe bed
using four M10 caphead bolts/
washers and tighten securely. (See
figs C & D)
24
Lower the mill assembly down
onto the angle support casting
and secure in place using four M8
caphead bolts. (See figs C & E)
M8 Caphead bolts
Lock nut
Step 3
Fig E
Fig F
Leg Support