Safety Precautions - Avocent MERGEPOINT SP MANAGER Installer/User Manual

MergePoint® SP Manager Installer/User Guide
6
Table 1.2: Descriptions for MergePoint 24/40 Manager Configuration
Number Description
1 Private ethernet ports (24 or 40)
10/100/GE (Gigabit Ethernet) primary
2
public Ethernet port
3 Auxiliary (AUX) port (disabled)
Console port - For connecting either a
4 terminal or a computer running a
terminal emulation program

Safety Precautions

To avoid potentially fatal shock hazard and possible damage to equipment, please observe the
following precautions:
• Do not use a 2-wire power cord in any Avocent product configuration.
• Test AC outlets at the target device and monitor for proper polarity and grounding.
• Use only with grounded outlets.
NOTE: The AC inlet is the main power disconnect.
Failure to observe the precautions in this section may result in personal injury or damage to
equipment.
Observe the following general safety precautions when setting up and using Avocent
equipment.
• Follow all cautions and instructions marked on the equipment.
• Follow all cautions and instructions in the installation documentation or on any cautionary
cards shipped with the product.
• Do not push objects through the openings in the equipment. Dangerous voltages may be
present. Objects with conductive properties can cause fire, electric shock or damage to the
equipment.
• Do not make mechanical or electrical modifications to the equipment.
• Do not block or cover openings on the equipment.
Number Description
10/100 secondary public Ethernet port - (Optional)
5 For connection to a second network connection or for
failover connection to the primary network
6 Blade or service processor
7 Remote user web interface
8 Console user