Filtering The Targets Table - Ip Phones View - Avaya Integrated Management Software Update

Table 6: Filter Criteria Fields - Gateways, Data Switches and Circuit Packs View (continued)
Field
Select DOCM
Group
Device Type
Software Version
Hardware Version
Port Network
Software Type
Server Status
Analyzer State

Filtering the Targets Table - IP Phones View

To filter the Targets Table from the IP Phones view:
1. Select the IP Phones tab.
2. Select View > Filter from the menu. The Filter Devices dialog box opens for the IP Phones
view (see
Description
In the Select Group field, you can show the AM 110 devices that belong to a
specific DOCM group. Select the DOCM group used for the devices you want
to display from the drop-down box (AM110 devices only).
In the Device Type section, select the product categories and sub-categories
you want to display. For more information on filtering by device type, refer to
Filtering by Device Type
In the Sw version section, select the software version used for the target you
want to display.
In the Hw version section, select the hardware version currently running the
target you want to display. (Only available in the Gateways, Data Switches,
and Circuit Packs view.)
In the Port Network section, select the port network number for the TN
boards you want to display. (Only available in the Gateways, Data Switches,
and Circuit Packs view.)
In the Software Type section, select the software entity (Boot Loader,
Image, or Web Management) to display targets using that type of software.
(Only available in the Gateways, Data Switches, and Circuit Packs view.)
In the Server Status section, select the status of the server that you want to
display. (Only available in the CM Software Management view.)
In the Analyzer State section, select the icon or icons representing the
version update status of targets you want to display.
Figure 7).
on page 36.
Filtering the Targets Table
2 of 2
Issue 6 January 2008 31