Honeywell VisionPRO 8000 Product Data page 30

TM
VisionPRO 8000 Touchscreen Programmable Thermostat
The remaining run time days can be viewed by pressing the
More key; the remaining days can be edited using the More
key or from the Installer Setup. To view or reset the reminder
before it expires, follow these steps using the More key:
1. Press the More key until the filter reminder appears on
the screen. This is the number of fan run-time days
remaining on the filter reminder.
MON TUE WED
CHANGE FILTER UV LAMP HUMIDIFIER PAD
RESET
SCHED SCHED HOLD HOLD
WAKE
DONE EDIT
2. Press the Edit key.
3. Use the Up and Down keys to change the number of
run-time days.
MON TUE WED
CHANGE FILTER UV LAMP HUMIDIFIER PAD
SCHED SCHED HOLD HOLD
DONE WAKE
68-0280—01
THU FRI SAT SUN
DAYS
CLOCK SCREEN MORE
LEAVE RETURN SLEEP CANCEL
M22449
THU FRI SAT SUN
DAYS
CLOCK SCREEN
LEAVE RETURN SLEEP CANCEL
M22450
4. Press the Done key to go back to the viewing screen.
MON TUE
CHANGE
RESET
SCHED SCHED
DONE EDIT
5. Press the Reset key to activate the new number of days
selected in the previous screen.
MON TUE
CHANGE
RESET
SCHED SCHED
DONE EDIT
6. Press the Done key to return to the Home screen.
30
WED THU FRI SAT
FILTER UV LAMP HUMIDIFIER PAD
DAYS
HOLD HOLD CLOCK SCREEN MORE
WAKE LEAVE RETURN SLEEP CANCEL
WED THU FRI SAT
FILTER UV LAMP HUMIDIFIER PAD
DAYS
HOLD HOLD CLOCK SCREEN MORE
WAKE LEAVE RETURN SLEEP CANCEL
SUN
M22449
SUN
M22451