Honeywell VisionPRO 8000 Product Data page 14

TM
VisionPRO 8000 Touchscreen Programmable Thermostat
Y2 RC
R
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND
1
OVERLOAD PROTECTION AS REQUIRED.
IF MORE THAN ONE C7189 REMOTE SENSOR IS REQUIRED,
2
REFER TO FIGURE 3.
WIRES MUST HAVE A CABLE SEPARATE FROM THE
3
THERMOSTAT CABLE.
Fig. 28. Wiring a single C7189 Indoor Sensor.
Y2
W2
1 2
S2
Y2
W2
2
1
2
SENSORS MUST BE ARRANGED IN THIS
1
CONFIGURATION TO OPERATE CORRECTLY.
WIRES MUST HAVE A CABLE SEPARATE FROM THE
2
THERMOSTAT CABLE.
Fig. 29. Wiring Multiple C7189 Sensors.
68-0280—01
C7189
2
3
1
R
C
M19972
1
C7189 C7189
C7189 C7189
1
C7189 C7189 C7189
C7189 C7189 C7189
C7189 C7189 C7189
M19973
Set Calendar and Time
Thermostat keeps current time and day for up to ten years
under normal use after the calendar is set.
When the thermostat is first powered, the display is ready to
set the calendar and time.
NOTE: Calendar can also be set in the Installer Setup.
1. Press the arrow keys to set the year, month and day.
2. Press the Done key.
SET CURRENT DAY
SET MONTH
MO
DONE
3. Press the arrow keys to set the current time.
4. Press the Done Key.
MO
DONE
14
TUE WE E TH FR R SA SU
USE ARROWS TO SET YEAR AND TIME
USE ARROWS TO SET YEAR AND TIME
W WE TH FR SA SU
M22424
M22425