ATN ThOR Series Operator's Manual page 4

wARNING
Do not permanently attach the scope to dynamic-mount appli-
cations that continuously transmit vibration (such as on vehi-
cles or heavy machinery).
wARNING
Do not point the scope directly at any high-intensity objects
that you must not view with your eyes (such as the sun or a
welding arc). If you do, you will damage the scope.
wARNING
Operating ThOR Series outside of its specified operating tem-
perature range or voltage range can cause permanent damage
and will void the warranty.
wARNING
Use the power button to turn the scope off before you remove
power (remove batteries or disconnect external power
supply).
wARNING
ThOR Series operates over a wide operating temperature
range (-20°C to +60°C). Not all lithium batteries are specified
over this same temperature span. Check the manufacturer's
specifications of your selected battery to verify the valid tem-
perature range.
wARNING
Do not use any battery other than a CR-123A lithium battery.
DO NOT use any battery(ies) providing a (combined) voltage
greater than 12.0 volts.
wARNING
Do not install batteries of different types (lithium with lithium-
ion rechargeable). All batteries must be of the same type.
wARNING
Always replace ALL 4 batteries. If you install new batteries with
used batteries, the result may be dangerous.
b