Led Display & Button - Planet VIP-156 User Manual

LED Display & Button
1
2 LAN
3 12V DC
4 Reset
Note
LED Indicators
PWR
STATUS
LNK/ACT
RING
Left / Right Panel of VIP-156PE
RJ-45 connector, to maintain the existing network structure,
PC
connected directly to the PC through straight CAT-5 cable
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-156PE)
12V DC Power input outlet
Reset to the factory default setting
Machine default IP is http://192.168.0.1. Press RESET
button on rear panel over 5 seconds will reset the VoIP Phone
Adapter to factory default value. (Except speed dial and
call forward settings)
Power is supplied to the gateway.
The Status LED will be flashing when the machine is operational
OFF: the gateway is connected to LAN at 10Mb/s.
ON: the gateway is connected to LAN at 100Mb/s.
OFF: the phone is idle.
ON: the phone is in use (offhook).
Blinking: the phone is ringing.
Descriptions
9