Planet VIP-156 User Manual page 12

Network settings via Keypad commands
The VIP-156 series phone adapters support telephone keypad configurations, please connect analog
telephone set and refer to the following table for machine network configurations.
IVR Menu Choice
#111#
Set DHCP client
#112xxx*xxx*xxx*
Setup Static IP Address
xxx#
#113xxx*xxx*xxx*
Set Network Mask
xxx#
#114xxx*xxx*xxx*
Set Gateway IP Address
xxx#
#115xxx*xxx*xxx*
Set Primary DNS Server
xxx#
Following keypad commands can be used to display the network settings enabled on VIP-156 via voice
prompt.
IVR Menu Choice
#120# Check IP Address
Check network connection Type
#121#
#122# Check the Phone Number
#123# Check Network Mask
#124# Check Gateway IP Address
Check Primary DNS Server Setting
#125#
#128# Check Firmware Version
Please contact your Internet service provider to obtain the
Internet access type, and select the proper network settings
Hint
in VIP-156 to establish the network connections.
Machine operation
Machine operation
Parameter(s)
None
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
IVR will announce the current IP address of
the VIP-156
IVR will announce if DHCP in enabled or
disabled.
IVR will announce current enabled VoIP
number
IVR will announce the current network mask
of the VIP-156.
IVR will announce the current gateway IP
address of the VIP-156.
IVR will announce the current setting in the
Primary DNS field.
IVR will announce the version of the
firmware running on the VIP-156.
Notes:
VIP-156 will change to
DHCP Client
DHCP will be disabled and
system will change to the
Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
Notes:
12