Product Specification - Planet IFT-802 User Manual

▫ DIN-Rail or wall mountable
▫ DIP-switches to set the operation mode and Link- Lost-Forwarding function.
Industrial Conformance:
▫ 12~48V DC, redundant power with polarity reverse protect function and connective
removable terminal block for master and slave power
▫ 0 to 60 Degree C operation temperature
▫ IP-30 Aluminum case
▫ EMI complies with FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN6100-4-4, CE
EN6100-4-5 and CE EN6100-4-6
▫ Stability testing with IEC60068-2-32(Free fall), IEC60068-2-27(Shock) and
IEC60068-2-6(Vibration)

1.4 Product Specification

Model
Standard
10/100Mbps TP
Fiber Connector
Architecture
Fiber Parameters
Link Lost Forward
DIP Switch
LED
IFT-802
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX / 100BASE-FX
IEEE 802.3x Flow Control and Back pressure
CAT-3/5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation
Function Support
Multi-Mode SC connector
Store and forward
Fiber Core: Multi-Mode (62.5/125µm, 50/125µm). Wavelength: 1310nm
Fiber Distance: Multi-Mode Fiber, up to 2Km
TX to Fiber: If TX port link down, the media converter will force Fiber port to link down
Fiber to TX: If Fiber port link down, the media converter will force TX port to link down.
DIP Switch 1:
ON: Enables Port Alarm
OFF: Disables Port Alarm
DIP Switch 2:
ON: Enables LLF (Link Lose Forwarding)
OFF: Disables LLF (Link Lose Forwarding)
DIP Switch 3:
ON: 100Base-FX Half-mode
OFF: 100Base-FX Full-mode
DIP Switch 4:
ON: 100Base-TX Full-duplex mode
OFF: Auto-Negotiation
Power (Green), Power1 (Green), Power2 (Green), Fault (Orange)
Fiber: Link/Activity (Green)
Half/Full Duplex (Orange)