Philips WACS4500 User Manual page 29

3
In the track list screen, press RECORD (or
press REC on the remote control)
➜
List of tracks with checkboxes appears
4
Press MARK•UNMARK to select or deselect
the tracks to be recorded
●
To select/deselect all tracks, press and hold
MARK• UNMARK
CD/MP3-CD
REC
5
Press RECORD to start recording
➜
Display shows CD-Rec and the current
album name
(a default album name, e.g. Album_001, is
assigned if the CD track information cannot be
found in the Center's Gracenote® music
recognition service database)
➜
The Center returns to CD mode when
ripping is complete
6
To rip another CD, repeat Steps 1-4 again
7
To stop recording, press STOPÇ
HD SOURCE SEARCH
MARK/UNMARK
DBB
Helpful hint:
– The WAC4500 Center allows you to look up the
latest CD information via the Internet from the
online Gracenote® music recognition service
database if you are unable to find it in the built-in
Gracenote® music recognition service database.
See Gracenote CD Information:To update
Gracenote music recognition database.
To record from CD during playback
(for audio CDs only)
1
During playback, press RECORD
➜
Recording and playback start from the current
track
➜
Display shows CD-Rec and the current album
name
or
1
Follow Steps 1-4 under To record from CD at
fast speed
2
Change the recording speed:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Settings menu
c. Press 3 or 4 and 2 select Rec speed
d. Press 3 or 4 and 2 select Normal speed
3
Press RECORD to start recording
Helpful hints:
– It takes some time to convert the recorded
tracks into MP3 files.
– If power failure occurs during the conversion, you
will lose the tracks that have not been converted.
Always switch the set to power-saving mode before
removing its power plug (see Basic functions).
6. HD
29