Basic Functions; Switching To Standby/On And Selecting Functions; Switching To Power-Saving Mode - Philips WACS4500 User Manual

5. Basic functions

5.1 Switching to standby/on and
selecting functions
1
When the set is switched on, press STANDBY-
ON/ ECO POWER to switch it to standby
y
mode (or press on the remote control)
➜
The Red indicator lights up
➜
Center:The screen dims. Display shows the
connected or previously connected Stations
➜
Station: Display shows the connected or
previously connected Center
– The screen will remain empty if no Center is
found
2
To switch on, press STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected
➜
The Green indicator lights up
OR
Press the source button on the remote control
(e.g. CD/MP3-CD, HD, SOURCE)
3
To select functions, press SOURCE once or
more times (or press CD/MP3-CD,
HARDDISK/ HD, SOURCE on the remote
control)
CD/MP3-CD HD
Helpful hint:
– CD/MP3-CD source is only available on the
Center.
22
SOURCE SEARCH
5.2 Switching to power-saving
mode
In power-saving mode, the set's display and Wi-Fi
connection are turned off.The Center's hard disk
also stops working.When the Center is switched
to power-saving mode, you cannot stream music
between the Center and Station or import music
from the PC to Center.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to power-
saving mode (or press and hold
control).
➜
The Red indicator lights up
➜
The display is switched off
2
To switch on, press STANDBY-ON/ ECO
POWER.
➜
The set switches to the last source selected
Helpful hints:
– In power-saving mode, the networking, sound,
display, language, CD recording settings, the tuner
presets, and the volume level (maximum: the
moderate level) will be retained in the set's
memory.
– To protect the hard disk, always switch the
Center to standby/power-saving mode before
removing its power plug from the wall outlet.
y
on the remote