Using Ac Power - Philips WACS4500 User Manual

3.5 Using AC power

1
Make sure that all connections have been made
before switching on the power supply
2
Connect the AC power cord to the wall socket.
This switches on the power supply
When the Center or Station is switched to
standby mode, they will still be consuming some
power. To disconnect the system from the
power supply completely, remove the power
plug from the wall socket.
Helpful hint:
– Always press and hold STANDBY-ON to switch
the set to power-saving mode before removing its
power plug.
The rating label of WAC4500 and WAS4500
is located on the bottom of the sets.
For users in the U.K.: please follow the
instructions on page 2.
3. Installation
19