Network Setting; Network; Deleting A Station - Philips WACS4500 User Manual

9. Network setting

9.1 Adding Additional Station to
the Wi-Fi network on the Center
Up to 5 Stations can be connected to the
WAC4500 Center.When adding a Station to the
Center's Wi-Fi network, you can play the Center's
music library on the Station or move music
playback between the Center and Stations (see
HD). To add a Station to the Center's Wi-Fi
network, proceed as follows:
On the Center
1
Check that WAC4500 Center is in HD source
2
Select Add New Station
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
➜
You will enter Installation Mode. Searching for
the new station starts
➜
Playback stops on the previously associated
Station if you are playing the HD source.
Helpful hints:
– If there are 5 stations connected, Add New
Station option will not present. In this case, please
delete a station first, and then to add new stations
On Stations
3
Enter Installation Mode
a. Remove the power plug of the Stations, and
then connect them to the power supply again
➜
Connecting to Center appears
b. On the remote control, press MENU to
enter Installation Mode
➜
HD screen appears if the Station is connected
to the Center
➜
The Center and the Stations are now in the
same Wi-Fi network.
40
On the Center
4
Press STOPÇ when all the Stations are found.

9.1.1 Deleting a Station

Center's
Wi-Fi

network

1
Check that the WAC4500 Center is in HD
source
2
Select Delete Station.
a. Press MENU to enter the menu screen.
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu.
c. Press 3 or 4 and 2 to select Delete Station
➜
The list of connected Stations will be
displayed on the Center
3
Press 3 or 4 and 2 to select the Station you
wish to delete.
4
Press 3 or 4 and 2 to select Yes.
for illustration only