Table of Contents
Advertisement
Remote Control Batteries
1
Press and slide off the battery cover
Note:
(1) Make sure that the batteries are fitted the correct way round.
(2) Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
(3) Do not mix different battery types, i.e. Alkaline and Manganese. Do not use rechargeable (Ni-Cad) batteries.
Quick Start Guide
Set-up
Be sure to use the special installation brackets (refer to page 6) when setting up the Wide Plasma Display.
Always be sure to ask a qualified technician to carry out set-up.
(Example) When using the pedestal to set up the Wide Plasma Display
1
Assemble the pedestal by
attaching the poles.
Note:
(1) Refer to the Installation Instructions supplied with the pedestal for details on assembling the pedestal.
2
R6(UM3) size
Insert batteries – note correct polarity
(+ and –)
2
Insert the poles of the pedestal
into the holes in the bottom of the
Wide Plasma Display.
3
Replace the cover
3
Secure the Wide Plasma Display
at the back using the four screws.
7
Advertisement
Table of Contents
