Picture Menu - Panasonic TC-42PD1FA Operating Instructions Manual

Wide plasma display
Hide thumbs Also See for TC-42PD1FA:
Table of Contents

Advertisement

Picture Menu

1.Push the "Menu" Button.
2.Select the "Picture" Menu by pushing the
Position Up "F" or Down "G" Button and
Access the "Picture" Menu by pushing the
"STR" Button.
3.Select the required function by pushing the
Position Up "F" or Down "G"buttons, and
access and alter the setting by pushing the
Position Left "I" or Right "H" buttons.
Note:
(1) You can change the level of each Function
(Picture Mode, Colour, Tint, Brightness,
Contrast, Sharpness, White balance) for each
picture Menu.
(2) The setting details for normal and dynamic
respectively are memorised separately for five
types of input signal format (NTSC, PAL,
SECAM, 1080i and RGB/PC). (NTSC includes
525i and 525p (480p) signals, and PAL
includes 625i signals.)
Note:
(1) The "Tint" setting can be adjusted for NTSC
signal only.
(2) "Colour", "Tint" and "Sharpness" settings
cannot be adjusted during "RGB" and "PC"
input signal modes.
(3) If the "Manual W/B" setting is changed to ON
and the Position Down "G" button is pressed,
the "Manual W/B" menu will be displayed.
(Refer to page 25.)
(4) The adjustment range values should be used
as an adjustment reference.
Helpful Hint (
If the N button on the remote control unit is pressed when the "Picture" menu is displayed, all adjustment values will
be returned to the factory setting level of each picture mode.
24
MENU
Picture Mode
Normal
Dynamic
Picture
Mode
Colour
(NTSC only)
Brightness
Contrast
Sharpness
White
balance
Manual W/B
Normalisation)
N
1,2
Access
Select
Picture
Sound
STR
Signal
Set up
For viewing in normal (evening lighting)
environments.
This menu selects the normal levels of
Brightness and Contrast.
For viewing in brighter environments.
This menu selects a higher than normal
levels of Brightness and Contrast.
Item
Effect
Less
More
Tint
Reddish Greenish
Darker Brighter
Less
More
Less
More
3
Picture
Adjust
Normal
Select
Dynamic
Picture Mode
0
Colour
0
Tint
Brightness
0
Contrast
30
Sharpness
0
Warm
White balance
On
Manual W/B
Off
MENU
Exit
Function
Adjustment range
Normal / Dynamic
-30
30
-30
30
-15
15
-30
30
-15
15
Warm / Normal / Cool
Off / On

Advertisement

Table of Contents
loading

Table of Contents