Panasonic TC-42PD1FA Operating Instructions Manual page 21

PICTURE POS./SIZE Controls
During "RGB" and "PC" input signal modes
Choose the option and adjust by pushing the Position
Up "F" or Down "G" buttons, and by setting with the
Position Left "I" or Right "H" buttons.
Mode
When the Position Left "I" button is pressed
H-pos
When the Position Left "I" button is pressed
V-pos
When the Position Left "I" button is pressed
H-size
When the Position Left "I" button is pressed
V-size
Clock Flickering and distortion can be eliminated by using the Position Left "I" or Right "H" button to carry
Phase out adjustment.
Note:
(1) The same adjustment details are memorised in both RGB and PC input signal modes for each type of input signal
(frequency).
Helpful Hint (
If the N button on the remote control unit is pressed when the Picture Pos./Size display is active, all adjustment
values will be returned to the factory setting level.
Normalisation)
N
Picture
When the Position Right "H" button is pressed
When the Position Right "H" button is pressed
When the Position Right "H" button is pressed
When the Position Right "H" button is pressed
Picture Pos./Size
Normal
Adjust
Select
H-pos
V-pos
H-size
V-size
Clock Phase
PICTURE
POS./SIZE
Exit
21