Table of Contents
Advertisement
ASPECT Controls
The Wide Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen "cinema
format" picture.
PLASMA DISPLAY
INPUT
PC
MANUAL-ASPECT-AUTO
2
PICTURE MODE
MENU
STR
PICTURE
POS./SIZE
18
1
N
1
AUTO
ASPECT-
ASPECT-AUTO Button (Panasonic Auto)
Press the ASPECT-AUTO button to switch to
Panasonic Auto mode. The display will
automatically become enlarged.
For an elongated image
For a 4:3 image
Note:
(1) If an S1 signal is detected while Panasonic Auto mode is
active, the aspect mode will change to "16:9".
(2) If a 525p or 1080i signal is input during Component input
signal mode and during RGB and PC input signal mode the
controls will not operate.
2
MANUAL-ASPECT
ASPECT-MANUAL button
The aspect mode changes each time the
ASPECT-MANUAL button is pressed.
4:3
Note:
(1) During RGB and PC input signal mode, the mode switches
between "4:3" and "16:9" only.
(2) For a 525p (480p) signal input during "Component" input
signal mode, the mode switches between "Zoom1" and
"16:9" only.
(3) When an S1 signal is being received during "S-Video" input
signal mode, the mode is set to "16:9" mode.
(4) When a 1080i signal is being received, the mode is set to
"16:9" mode, and switching is not possible.
(5) The aspect mode is memorised separately for different
input signal formats (NTSC/PAL/SECAM, 525p, RGB and
PC). (525p includes 525i and 625i signals.)
Panasonic Auto
Image is expanded
Changes in accordance with the
Panasonic Auto mode setting.
(Refer to page 28.)
Zoom1
Zoom2
Just
16:9
Advertisement
Table of Contents
