Panasonic TC-42PD1FA Operating Instructions Manual page 25

Picture Menu
1.Use the Position Up "F" or Down "G"
buttons to select the "Manual W/B" menu
from the "Picture" menu, and then use the
Position Right "H" button to select "On".
2.Press the Position Down "G" button.
(The "Manual W/B" menu screen will then
be displayed.)
3.Select the required function by pushing the
Position Up "F" or Down "G"buttons, and
access and alter the setting by pushing the
Position Left "I" or Right "H" buttons.
Item Effect
W/B High R
Less More
W/B High B
Less More
W/B Low R
Less More
W/B Low B
Less More
Note:
(1) Use the table below as a reference when making "W/B" adjustments.
(2) The adjusted values are memorised separately for each Picture Mode (Normal/Dynamic).
(3) The adjustment range values should be used as an adjustment reference.
Helpful Hint (
If the N button on the remote control unit is pressed when the "Manual W/B" menu is displayed, all adjustment values
will be returned to the factory setting level.
Adjustment range
-30 – 30
-30 – 30
-30 – 30
-30 – 30
Adjustment value for
Item
cold white balance
W/B High R
W/B High B
W/B Low R
W/B Low B
Normalisation)
N
1,2
Picture
Normal
Picture Mode
Colour
Tint
Brightness
Contrast
Sharpness
White balance
Manual W/B
MENU
Exit
Adjusts the white balance for light red areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
Adjusts the white balance for dark blue areas.
Adjustment value for
warm white balance
-5
10
0
0
3
Manual W/B
Adjust
Normal
Select
Dynamic
W/B High R
0
W/B High B
0
W/B Low R
0
W/B Low B
30
MENU
Exit
0
Warm
On
Off
Details
10
-5
0
0
Adjust
Select
0
0
0
0
25