Quality Tab - Panasonic DP-2310 Operating Instructions Manual

Configuring the Printer Driver Settings
All Windows Common Settings

Quality Tab

1. Halftone (For Windows 98/Me only)
Select either None or Dither.
2. Resolution
Select the print resolution (300 dpi / 600 dpi). (See Note1)
3. Contrast
Adjust the contrast of print images. (Note: Only if Halftone is set to None.)
4.
Halftone Color Adjustment...
• Contrast
Adjust the contrast of print images.
• Brightness
Adjust the brightness of print images.
• Dark Picture
Select this option in order to print dark images brighter.
• Negative
Select this option in order to print images with black and white reversed.
• Input RGB Gamma
Adjust the gamma of print images (color intensities). Red, Green and Blue can also be adjusted
individually.
• Black Ref/White Ref
Adjust the difference between the darkest and lightest colors of an image. Increasing the Black Ref
value or decreasing the White Ref value will intensify the contrast of the image but reduces the range of
colors in between.
• Picture
Select a test pattern type.
Selecting the View check box will display halftone adjustment results in the test pattern.
NOTE
80
<Windows 98/Me>
button (For Windows NT/2000/XP only)
1. dpi (dots per inch) represents the number of dots contained in one inch. The larger the value,
the higher the resolution would be.
<Windows NT/2000/XP>