Lcd Panel - Packard Bell EasyNote BU Series Disassembly Manual

2. Remove the one screw holding the I/O board
3. Lift out the I/O Board.
Note: During re-assembly, take care to align the main board and I/O board properly before
pushing them back together (to avoid bending the pins of the connector).

LCD Panel

1. Remove the LCD Assembly as described under ' LCD Assembly' .
2. On the LCD assembly, remove five rubber stoppers.
3. Remover the five screws that were covered by the rubber stoppers.
Fig. 26 The I/O board screws.
EasyNote BU Disassembly Manual 19