Main Board; I/O Board - Packard Bell EasyNote BU Series Disassembly Manual

5. Lift out the LCD assembly.

Main Board

1. Remove the CPU, memory and top cover as described under ' Top
Cover' .
2. Remove the nine screws from the main board.
3. Pull the connector between the I/O Board and the main board loose.
4. Lift the main board and slide it to the left to release the VGA port.
5. Lift out the main board.

I/O Board

1. Remove the main board as described under ' Main Board' .
Fig. 24 The hinge screws.
Fig. 25 The main board screws.
EasyNote BU Disassembly Manual 18