Alternate Instructions For Installing A Drive (Windows Xp/2000) - Western Digital WD SATA Hard Drives Installation Manual

Alternate Instructions for Installing a Drive (Windows XP/2000)

If your hard drive kit did not include a Data Lifeguard Tools CD, you can use Window's
built-in Disk Management utility to format and partition your drive. Follow the instructions
below according to your operating system. If necessary, refer to your operating system manual.
Install a Single Hard Drive:
1. Boot to the Windows XP or Windows 2000 Installation CD.
2. Follow the directions in the installation prompt.
Install an Additional Hard Drive in Windows:
Windows XP
1. Click the Start button and point to Control Panel > Performance and Maintenance >
Administrative Tools.
2. Double-click on the Computer Management icon and select Disk Management on the
left side.
3. Right-click on your new hard drive and proceed with partitioning and formatting.
Windows 2000
1. Click the Start button and point to Settings > Control Panel > Administrative Tools.
2. Double-click on the Computer Management icon and select Disk Management on the
left side.
3. Right-click on your new hard drive to proceed with partitioning and formatting.
WESTERN DIGITAL SERIAL ATA HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 17