Western Digital WD SATA Hard Drives Installation Manual page 17

5. Select Installation Type as Add the drive as an additional device. If you wish to create
customized partitions, select the box to change advanced options and check Custom
Partition.
6. The Custom Partition Setup screen appears. Your hard drive is automatically partitioned
to the largest capacity up to 137 GB based on your operating system limitations. If the
drive contains existing partitions and if you wish to create or add partitions, you must first
click Delete to remove existing partitions. To add partitions, use the slider bar to the
desired size of the partition, then click Add Partition. After configuring the partitions,
click Next.
7. The next screen outlines your setup options, number of partitions, file format, and the
size of each partition. Data Lifeguard Tools is now ready to set up your new hard drive.
Click Erase then Next.
Caution: Continuing will erase all existing data on the hard drive. If you are certain, click
Yes to proceed with format and partition.
WESTERN DIGITAL SERIAL ATA HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 13