Table of Contents
Advertisement
Alternate Instructions for Installing a Drive (Windows XP/2000)
If you experience any difficulties using Data Lifeguard Tools to set up and format an
additional or single drive, you can use Window's built-in Disk Management utility. Follow
the instructions below according to your operating system. If necessary, refer to your
operating system manual.
Install a Single Hard Drive:
1. Boot to the Windows XP or 2000 Installation CD.
2. Follow the directions in the installation prompt.
Install an Additional Hard Drive in Windows:
Windows XP
1. Click the Start button and point to Control Panel > Performance and Maintenance >
Administrative Tools.
2. Double-click on the Computer Management icon and select Disk Management on the
left side.
3. Right-click on your new hard drive and proceed with partitioning and formatting.
Windows 2000
1. Click the Start button and point to Settings > Control Panel > Administrative Tools.
2. Double-click on the Computer Management icon and select Disk Management on the
left side.
3. Right-click on your new hard drive to proceed with partitioning and formatting.
WESTERN DIGITAL EIDE HARD DRIVE
INSTALLATION GUIDE
TROUBLESHOOTING - 24
Hide quick links:
Advertisement
Table of Contents
