IVT BlueSoleil User Manual page 43

Figure 5.1: Connect BlueSoleil™ DUN Connection
Step 6: Dial to Internet
1. The Connect BlueSoleil™ DUN Connection window appears
(Figure 5.1).
2. Input a valid username, password and the Internet Service
Provider's (ISP's) phone number, then click the Dial button.
3. If the dial-up is successful, a small icon appears on the bottom
right hand of the Windows taskbar, indicating that the dial up
connection is successfully established.
4. If the dial-up fails, the Bluetooth connection between the two
computers will be disconnected. In this case, to reconnect to the
T39's DUN service, repeat Steps 5 above.
Step 7: Once the dial-up connection is established, users can browse web
sites or access other Internet services from Computer A.
Step 8: There are three methods to disconnect the dial-up connection:
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
♦ Method 1. Double-click the dial-up connection icon on the
bottom right of the Windows taskbar. The BlueSoleil™
DUN Connection Status window appears. Click the
Disconnect button to disconnect the dial-up connection
(Figure 5.2).
♦ Method 2. Right-click the Bluetooth Dial-up
Networking icon in the Main Window, and then click the
Disconnect menu item on the pop-up menu.
♦ Method 3. Right-click the T39 device in the Main Window
and select Disconnect | Bluetooth Dial-Up
Networking.
40