IVT BlueSoleil User Manual page 100

Step 5: Find the headset service of Headset EL-235 .
♦ Double-click the Headset EL-235 device icon
♦ Enter the Bluetooth passkey (Generally,0000), if necessary, to
start authentication.
♦ Once authentication is complete, the Headset service is found.
Step 6: Connect to Headset EL-235.
After creating pairing relationship between Headset and dongle, we
can establish the audio connection in several ways:
♦ Right-click Headset service icon; select Connect on the pop-up
menu. The headset ring to alert the user. After the user answers
the call, the connection will be established. (Figure 14.2) But, if
user does not answer after 20 rings, the connection will be
released.
♦ Make sure you have started your Headset AG service in Service
Window. You can press answer key on your headset, and then it
will initiate a connection to BlueSoleil.
Figure 14.2: The connection is successfully established
♦ Play music, record sound or chatting, please refer to
Step 7:
14.3
Step 8: After using Headset, you can disconnect the connection as follows.
♦ If BlueSoleil initiate connection to Headset,
Right-click Headset service icon; select Disconnect on the
pop-up menu.
♦ Or, press answer key on Headset to release this connection.
♦ If BlueSoleil is connected by headset,
Press answer key on Headset to release this connection.
♦ Or, stop Headset AG service in Service Window.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
on Computer A.
Chapter
97