IVT BlueSoleil User Manual page 22

♦ Enable Data Encryption
If the item is checked, the transmitted data will be encrypted into an
unreadable format.
3.2.2 Devices Property Page
when you establish connection with a paired device, you needn't input a passkey
again. A link key has been created and stored for the paired relationship.
How to pair with another device
♦ Automatically
If a passkey is required before connection, devices will pair automatically the
first time they connect (a passkey must be successfully exchanged).
♦ Manually
In the main window of BlueSoleil, right click a device, select Pair Device from
the popup menu, and then input a same passkey on both side.
How to unpair with another device
Manually
1. Click Remove Pairing button in this page.
2. In the main window of BlueSoleil, right click a paired device, select Unpair from
the popup menu.
Authorization for paired devices
Only when the Security Level is set as Medium in General Property Page, the
Authorization button is enabled. Select a device in Paired Devices list, then click
Authorization button to show an authorization dialog.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
Figure 3.2: Devices Property Page
19