IVT BlueSoleil User Manual page 27

Step 1: Insert Bluetooth Devices in both computers and start BlueSoleil™ in
both computers.
Step 2: Set device name of each computer to anything you want. Here they
are named Computer A and Computer B.
♦ In the BlueSoleil™ Main Window of Computer A, click My
Bluetooth | Property.... Enter 'Computer A' in the device name
field in the My Bluetooth Device window.
♦ Repeat for Computer B.
Step 3: Set the Security Level.
♦ Click My Bluetooth| Security, the Security Configuration panel
pops up.
♦ On the Security Configuration panel, select High in Security
Level.
♦ Note: If you check the Fixed Passkey and input a Bluetooth
passkey, this passkey will be used as the default passkey. The
other computer will then have to provide the same passkey during
the connection procedure if it wants to connect to this computer.
Figure 4.5: Security Configuration
Step 4: Start the PAN service on Computer A.
♦ In the BlueSoleil™ Main Window, click View | Service Window.
♦ In the Service Window, right-click the Personal Area Networking
icon. Choose Properties to configure my PAN service as Set up
Bluetooth Personal Area Network. (Figure 4.6) If the item of
Enable DHCP Server is checked, a DHCP server will be started
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
24