Access Internet Through Ivt Bluesoleil - IVT BlueSoleil User Manual

Figure 4.21: Access Outside LAN Network Configuration
4.5

Access Internet through IVT BlueSoleil™

The following sections outline how to enable Computer B to access the Internet
through Computer A.
Computer A:
Desktop
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
Network Adapter connecting to the
Internet
♦
Step 1:
Step 2: Start the PAN service on Computer A.
1. In the BlueSoleil™ Main Window, click View | Service Window.
2. In the Service Window, right-click the Personal Area Networking
3. Click Apply or OK button to save the configuration.
4. Right-click the Personal Area Networking icon again, and choose
Step 3: Setup connection between Computer A and Computer B. Please refer
to "Section 3.2:Communication Between Two Computers", and
complete Steps 6 to 8.
♦
Step 4:
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
Make sure Computer A can access Internet. Start IVT BlueSoleil™
on both Computer A and Computer B. Please refer to "Section
3.2:Communication Between Two Computers", and complete
Steps 1 to 4.
icon. Choose Properties to configure my PAN service as Access
Internet and select a local physical adapter as the WAN Adapter
(Figure 4.22), through which Computer A can access Internet. It
automatically enables NAT (Network Address Translation, please
refer to Windows Help Topic) function and a DHCP server.
(Notes: The BT Network Adapter on the client side must be set
to obtain an IP address automatically. The IP address is in the
form of 192.168.18.xxx.)
Start Service.
After Computer B gets an IP address as "192.168.18.xxx",
Computer B can now access the Internet through Computer A.
Computer B:
Notebook/ Laptop
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
35