Access Lan Through Ivt Bluesoleil - IVT BlueSoleil User Manual

Figure 4.20: Set the IP address
Note: When Computer A connects to Ethernet PAN-NAP B it accesses the LAN as if
it is attached to the LAN directly. The network properties of Computer A must be
the same as the computers in the LAN, that is, Computer A and the computers in
the LAN must be in the same subnet and have the same subnet mask. For example,
if the computers in the LAN use DHCP for IP addressing, then Computer A needs to
be configured to use DHCP. If the IP address is configured manually on the
computers in the LAN, then Computer A also needs to be configured manually.
4.4

Access LAN Through IVT BlueSoleil™

This section outlines the steps involved in accessing a Local Area Network (LAN)
through IVT BlueSoleil™.
Computer A:
Desktop
A Bluetooth Device
IVT BlueSoleil™
Network Adapter connecting to the LAN
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
IVT BlueSoleil™ User Manual
Computer B:
Notebook/Laptop
A Bluetooth Device
IVT BlueSoleil™
33