Getting Connected - VocoPro UHF-8800 Owner's Manual

Getting Connected

System Connection
1. Connect the AC POWER ADAPTER to the UHF-8800 receiver's POWER INPUT connector, then
plug the ADAPTER into a compatible AC electrical outlet.
2. Connect the UHF-8800's receiver to a sound system, mixer or amplifier's microphone input(s) with
either two ¼" output jack for a mixed channel output, or up to eight XLR output jacks for separate
output for each mic.
UHF-8800
M M N N O O
CHANNEL CHANNEL CHANNEL
SQ MIN MAX SQ MIN MAX SQ MIN MAX
PWR RF AF PWR RF AF PWR RF AF PWR RF AF
SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE
Q R S
Q R S
CHANNEL CHANNEL CHANNEL
ANT-IN
SQ MIN MAX SQ MIN MAX SQ MIN MAX
PWR RF AF PWR RF AF PWR RF AF PWR RF AF
SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE SINGLE CHANNEL WIRELESS MICROPHONE RECEIVER MODULE
Deciding Between Mixed or Separate Output
Mixed Channel Output
Pro: Uses only 2 mic input on an external mixer/amplifier.
Con: External mic adjustments are only applied to all mic channels.
Separate Channel Output
Pro: External mic adjustments can be applied on one or all mic channels.
Con: Uses up up to 8 mic inputs on mixer/amplifer.
Antenna Connection
Place antenna's TNC connector on the TNC jack and twist clockwise to fasten.
P P UHF-8800
CHANNEL
Professional 8 Channel UHF Wireless Mic System
SQ MIN MAX
T
T
CHANNEL
ANT-IN
POWER
SQ MIN MAX
IN
V.CANCEL
OUT V.PARTNER
VOCAL CANCEL/PARTNER
POWER
11
DSP ECHO
TAPE REC. OUT
TAPE REC.
DSP SONIC
ENHANCER
REVERB
LEVEL LOW HIGH