Table of contents Safety instructions ... 2 FCC information ... 3 Welcome ... 4 Listening for a lifetime ... 5 Specifications and features ... 6 Getting started ... 7 Getting connected ... 8 Front and rear panel descriptions ... 9 Microphone descriptions ...
Safety instructions CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Only refer servicing to qualified service personnel. Explanation of Graphical Symbols The lightning flash & arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of danger.
UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Club VocoPro for Karaoke news and events, chat rooms, club directories and even a KJ Service directory! We look forward to hearing you sound like a PRO, with VocoPro, your ultimate choice in Karaoke entertainment. Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear panel of the unit.
Now it s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Speciﬁcations and features SPECIFICATIONS Transmitter (microphones) Carrier Frequency: Freq. Stability Power Output Current Loss Maximum Distance Battery Dimensions Receiver Sensitivity Spurious rejection Image rejection S/N ratio Max. output Power Power consumption Dimensions FEATURES • 2 wireless handheld mics included • 2 mic outputs and 1 mixed output •...
1.5 V AA batteries (4) Setting Up the UHF-3200 Set up the UHF-3200’s receiver in a spot where there are no barriers above the antennas or between the receiver and the microphones. NOTE: Do not place the UHF-3200 in a space where there is something above the antennas such as a rackspace or an entertainment center.
Getting connected 1. Connect the AC POWER ADAPTER to the UHF-3200 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Attach the antennas by screwing in until secure. Be sure the antennas are pointing as straight up as possible.
2. SIGNAL INDICATOR LEDs - These will light up when signals are received from the microphone channels. 3. POWER (LED) - Indicates whether the UHF-3200 is ON or OFF. When it is lit, the power is ON. 4. VOLUME controls - Adjusts the individual VOLUME of the receiver’s 2 microphone channels.
Microphone descriptions Microphone 1. GRILL - Protects the microphone cartridge and helps reduce “breathy” and wind noise pick-up. 2. POWER switch - Used to turn the microphone power ON and OFF. The mic power is ON when the switch is in the ON position and the power is OFF when the switch is in the OFF position.
Microphone Position The UHF-3200 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct”...
Troubleshooting PROBLEMS No sound; receiver RF light(s) and mic(s) not lit. No receiver sound but the RF lights are glowing. Received signal is noisy or contains interference with transmitter on. Noise coming from the receiver with the mics turned OFF. Momentary loss of sound as transmitter is moved around performing area.