Trane IntelliPak User Manual page 23

Table GD-1— General Data — 20-40 Tons Continued
Filters
Panel Filters
Number/Size (Inches)
Face Area (Ft)
Bag Filters
Number/Size (Inches)
Cartridge Filters
Prefilters (For Bag & Cartridge)
Face Area (Ft)
Standard Unit Minimum Outside Air Temperature For Mechanical Cooling
Without Hot Gas Option
With Hot Gas Option
Low Ambient Option Minimum Outside Air Temperature
Without Hot Gas Option
With Hot Gas Option
Notes:
1. For cfm values outside these ranges, refer to RT-EB-104.
2. Refer to Table PD-30 for availability of electric heat kw ranges by voltage.
3. 20-30 Ton models are single circuit, 40 Ton models are dual circuit.
4. The firing rate of the unit can vary from 33% of the Heater Mbh up to the nameplate rating of the unit.
5. The firing rate of the unit can vary from pilot rate of 125,000 Btuh up to the nameplate rating of the unit.
6. Two-stage gas heat: 1st stage 50% on gas heat exchangers up to 500 Mbh; 60% on 800-1000 Mbh gas heat
exchangers.
RT-PRC010-EN
General Data
20 Ton 25 Ton
12 — 20x20x2 12 — 20x20x2
33.3
4 — 12x24x19 4 — 12x24x19
3 — 24x24x19 3 — 24x24x19
4 — 12x24x12 4 — 12x24x12
3 — 24x24x12 3 — 24x24x12
4 — 12x24x2 4 — 12x24x2
3 — 24x24x2 3 — 24x24x2
20
55 F
55 F
0 F
10 F
30 Ton
16 — 20x20x2
33.3 44.4
2 — 12x24x19
6 — 24x24x19
2 — 12x24x12
6 — 24x24x12
2 — 12x24x2
6 — 24x24x2
20 28
50 F 50 F
50 F 50 F
0 F 0 F
10 F 10 F
40 Ton
16 — 20x25x2
55.5
5 — 12x24x19
6 — 24x24x19
5 — 12x24x12
6 — 24x24x12
5 — 12x24x2
6 — 24x24x2
34
55 F
55 F
0 F
10 F
23