Creating Custom Data Graphs; Creating A Custom Data Graph From A Default Data Graph - Trane AdaptiView Operation Manual

6. Touch Save. The data graph appears with changed Y-axes scales.

Creating Custom Data Graphs

You can create a custom data graph in two ways:
•
•

Creating a custom data graph from a default data graph

1. Touch the Create Custom button at the top left of any default data graph screen (see
Figure 14. Data Graph Points screen
2. Touch the Add/Remove Data Points button at the bottom of the screen. The Add/Remove screen
3. Touch the up/down arrows at the top of the left box on the Add/Remove screen to scroll through
CTV-SVU02A-EN
By starting with a default data graph
By starting from a blank screen, with no previously defined data graph points
p. 27, for example). The Data Graph Points screen appears
appears (Figure 15, p. 30), pre-populated with data points from the default data graph you
chose.
Note: When you save the graph, a new custom graph is created; the default data graph is not
overwritten.
a list of chiller components. The list of items in the box just below the up/down arrows changes
to correspond to the component choice. (For reference, these items are listed in
Data for CenTraVac chillers, " p. 57).
Data Graphs
(Figure 14).
"Appendix:
Figure 12,
29